Elmea

MOTOR-STRAIGHTENERS

WHY CHOOSE ELMEA VARIABLE SPEED
MOTOR-STRAIGHTENERS?
  • Solid and long lasting machinery, robust structure in electro-welded steel
  • Accurate design
  • Designed to take up the least possible space
  • Designed to meet client requirements, event for off standard requirements
  • Motorised rollers manufactured in tempered and ground steel. Manufactured in-house
  • Rollers with gears on both ends obtained from a single body for high mechanical performance and long-lasting over time
  • Rollers activated by a continuous current motor with adjustable speed
  • Simple use: our motor-straighteners do not require specialist staff
  • Low operating costs: little maintenance, components subject to wear last over time
MODEL MR 17 - Width 200
MODEL MR 19 - Width 300
MODEL MR 28 - Width 400
MODEL MR 31 - Width 500
MODEL MR 58 - Width 600
MODEL MR 45 - Width 800
MODEL MR 79
Width from 1000 to 1500
MR 83 HEAVY SERIES
Width from 200 to 1500
ELECTRONICS:
  • Precision, speed, silence, reliability
  • Simple use with intuitive controls
  • Adjustable speed using potentiometer and inverter
ON REQUEST:
  • Chrome-plated rollers ideal for fragile materials such as aluminium
  • Counter-rollers to combat flexion of the rollers with thicker tapes
  • Opening upper rollers head to facilitate inspection and internal cleaning
  • Hydraulic swinging tape guide for tape insertion
  • Rollers ramp to support tape outbound
  • Butt remover to apply to the motor-straighteners outbound to eliminate the horizontal curvature: small rollers in tempered and ground steel, double screw adjustment
  • Connection sub-base on unwinder
Model MR 17
  • The motor-straightener model MR 17 straightens tape measuring 200 mm wide
  • The motor-straightener model MR 17 can straighten sheet metal with a maximum thickness of 2.5 mm
  • The motor-straightener model MR 17 is equipped with 9 rollers in ground, tempered steel with a hardness of 62 HRC of which 2 pull inbound and 7 straighten – An additional 2 straightening rollers can be obtained on request
  • The diameter of the rollers is 60 mm
  • The rollers are manufactured entirely in Elmea and have gears obtained from a single body to guarantee high mechanical performance and duration over time.
  • On request, we can carry out chrome-plating treatment on rollers, ideal for use on sheet metal in stainless steel, brass, aluminium and copper.
  • Finishing and levelling rollers with penetration gauge
  • Tilting head to reduce the length of the handle on the tape especially if very thick
  • Inbound tape guide unit with manually tilting head for correct insertion and feeding
  • Outbound handle control, height adjustable via photocell
Model MR 19
  • The motor-straightener model MR 19 straightens tape measuring 300 mm wide
  • The motor-straightener model MR 19 can straighten sheet metal with a maximum thickness of 3.5 mm
  • The motor-straightener model MR 19 is equipped with 9 rollers in ground, tempered steel with a hardness of 62 HRC of which 2 pull inbound and 7 straighten – An additional 2 straightening rollers can be obtained on request
  • The diameter of the rollers is 80 mm
  • The rollers are manufactured entirely in Elmea and have gears obtained from a single body to guarantee high mechanical performance and duration over time.
  • On request, we can carry out chrome-plating treatment on rollers, ideal for use on sheet metal in stainless steel, brass, aluminium and copper.
  • Finishing and levelling rollers with penetration gauge
  • Tilting head to reduce the length of the handle on the tape especially if very thick
  • Inbound tape guide unit with manually tilting head for correct insertion and feeding
  • Outbound handle control, height adjustable via photocell
Model MR 28
  • The motor-straightener model MR 28 straightens tape measuring 400 mm wide
  • The motor-straightener model MR 28 can straighten sheet metal with a maximum thickness of 3.5 mm
  • The motor-straightener model MR 28 is equipped with 9 rollers in ground, tempered steel with a hardness of 62 HRC of which 2 pull inbound and 7 straighten – An additional 2 straightening rollers can be obtained on request
  • The diameter of the rollers is 80 mm
  • The rollers are manufactured entirely in Elmea and have gears obtained from a single body to guarantee high mechanical performance and duration over time.
  • On request, we can carry out chrome-plating treatment on rollers, ideal for use on sheet metal in stainless steel, brass, aluminium and copper.
  • Finishing and levelling rollers with penetration gauge
  • Tilting head to reduce the length of the handle on the tape especially if very thick
  • Inbound tape guide unit with manually tilting head for correct insertion and feeding
  • Outbound handle control, height adjustable via photocell
Model MR 31
  • The motor-straightener model MR 31 straightens tape measuring 500 mm wide
  • The motor-straightener model MR 31 can straighten sheet metal with a maximum thickness of 3 mm
  • The motor-straightener model MR 31 is equipped with 9 rollers in ground, tempered steel with a hardness of 62 HRC of which 2 pull inbound and 7 straighten – An additional 2 straightening rollers can be obtained on request
  • The diameter of the rollers is 80 mm
  • The rollers are manufactured entirely in Elmea and have gears obtained from a single body to guarantee high mechanical performance and duration over time.
  • On request, we can carry out chrome-plating treatment on rollers, ideal for use on sheet metal in stainless steel, brass, aluminium and copper.
  • Finishing and levelling rollers with penetration gauge
  • Tilting head to reduce the length of the handle on the tape especially if very thick
  • Inbound tape guide unit with manually tilting head for correct insertion and feeding
  • Outbound handle control, height adjustable via photocell
Model MR 58
  • The motor-straightener model MR 58 straightens tape measuring 600 mm wide
  • The motor-straightener model MR 58 can straighten sheet metal with a maximum thickness of 2.5 mm
  • The motor-straightener model MR 58 is equipped with 9 rollers in ground, tempered steel with a hardness of 62 HRC of which 2 pull inbound and 7 straighten – An additional 2 straightening rollers can be obtained on request
  • The diameter of the rollers is 80 mm
  • The rollers are manufactured entirely in Elmea and have gears obtained from a single body to guarantee high mechanical performance and duration over time.
  • On request, we can carry out chrome-plating treatment on rollers, ideal for use on sheet metal in stainless steel, brass, aluminium and copper.
  • Finishing and levelling rollers with penetration gauge
  • Tilting head to reduce the length of the handle on the tape especially if very thick
  • Inbound tape guide unit with manually tilting head for correct insertion and feeding
  • Outbound handle control, height adjustable via photocell
Model MR 45
  • The motor-straightener model MR 45 straightens tape measuring 800 mm wide
  • The motor-straightener model MR 45 can straighten sheet metal with a maximum thickness of 2 mm
  • The motor-straightener model MR 45 is equipped with 9 rollers in ground, tempered steel with a hardness of 62 HRC of which 2 pull inbound and 7 straighten – An additional 2 straightening rollers can be obtained on request
  • The diameter of the rollers is 80 mm
  • The rollers are manufactured entirely in Elmea and have gears obtained from a single body to guarantee high mechanical performance and duration over time.
  • When the force and the width of the tape require it, the rollers are centrally counter-rolled
  • On request, we can carry out chrome-plating treatment on rollers, ideal for use on sheet metal in stainless steel, brass, aluminium and copper.
  • Finishing and levelling rollers with penetration gauge
  • Tilting head to reduce the length of the handle on the tape especially if very thick
  • Inbound tape guide unit with manually tilting head for correct insertion and feeding
  • Outbound handle control, height adjustable via photocell
Model MR 79
  • The motor-straightener model MR 79 straightens tape measuring 1000 mm wide
  • The motor-straightener model MR 79 can straighten sheet metal with a maximum thickness of 2 mm
  • The motor-straightener model MR 79 is equipped with 9 rollers in ground, tempered steel with a hardness of 62 HRC of which 2 pull inbound and 7 straighten – An additional 2 straightening rollers can be obtained on request
  • The diameter of the rollers is 80 mm
  • The rollers are manufactured entirely in Elmea and have gears obtained from a single body to guarantee high mechanical performance and duration over time.
  • When the force and the width of the tape require it, the rollers are centrally counter-rolled
  • On request, we can carry out chrome-plating treatment on rollers, ideal for use on sheet metal in stainless steel, brass, aluminium and copper.
  • Finishing and levelling rollers with penetration gauge
  • Tilting head to reduce the length of the handle on the tape especially if very thick
  • Inbound tape guide unit with manually tilting head for correct insertion and feeding
  • Outbound handle control, height adjustable via photocell
Model MR 83
  • Suitable for HEAVY THICKNESSES: The feeder motor-straightener model MR 83 straightens tape measuring 6 mm thick (according to the tape width to process)
  • The feeder motor-straightener model MR 83 straightens tape measuring with a Width: 200 mm – 300 mm – 400 mm – 500 mm – 600 mm – 800 mm – 1000 mm – 1200 mm -1400 mm – 1500 mm
  • The motor-straightener model MR 83 is equipped with 9 rollers in ground, tempered steel with a hardness of 62 HRC of which 2 pull inbound and 7 straighten – An additional 2 straightening rollers can be obtained on request
  • The diameter of the rollers is 99 mm
  • The rollers are manufactured entirely in Elmea and have gears obtained from a single body to guarantee high mechanical performance and duration over time.
  • When the force and the width of the tape require it, the rollers are centrally counter-rolled
  • On request, we can carry out chrome-plating treatment on rollers, ideal for use on sheet metal in stainless steel, brass, aluminium and copper.
  • Finishing and levelling rollers with penetration gauge
  • Tilting head to reduce the length of the handle on the tape especially if very thick
  • Heavy inbound tape guide unit and hydraulic, tilting for correct insertion and feeding
  • Outbound handle control, height adjustable via photocell